The Airgun Resource Center. Early access
The Airgun Resource Center Early access
‹ All air fill gear
GX Pump GX E-5K1
PCP compressor · shop

GX Pump GX E-5K1

5,800 psi / 400 bar auto-stop tank capable MSRP $900

Specifications

Max pressure
5,800 psi (400 bar)
Cooling
air cooling + water cooling
Moisture handling
condensing oil and water separator
Auto-stop
Yes
Duty cycle
up to 480 minutes (8 hours) continuous per manufacturer spec sheet
Noise
65-70 dB
Weight
77 lb
Vessel guidance
Tops off large tanks (9L, 3L reported by owners) as well as guns directly; not certified for scuba use
Also sold as
GX 5K1, GX-E-5K1

Estimated fill times

Vessel0 → 250 bar200 → 300 bar
gun cylinder 0.3L4.2 min1.7 min
1L bottle14.2 min5.7 min
2L bottle28.3 min11.3 min
3L bottle42.5 min17 min
6.8L (74ci) tank96.3 min38.5 min
9L (97ci) tank127.5 min51 min

All values estimated from stated manufacturer or reviewer benchmarks (3 benchmarks); treat as run-time, not wall-time, past the unit's duty-cycle guidance.

Where to buy

Prices captured 2026-07-06; follow the link for current pricing and stock.

About GX Pump

GX Pump logo
GX Pump
China

GX Pump has spent two decades building portable PCP compressors, and it shows in the details that matter: patented compression structures, roller bearings at the wrist pin, and a model range that runs from the entry CS1 up to the water-cooled CS4 with its five-hour continuous duty rating. The -I variants build the 110V converter into the body so one unit covers home outlets and car batteries alike. GX also backs its machines with a genuinely useful parts store, offering filters, seals, fans, and rebuild components that keep these compressors serviceable for years.

All GX Pump fill gear →

Own one?

Add it to your free Virtual Locker: link it to your guns, log maintenance, and keep photos and fill notes in one place.

Open my locker →

Specifications come from manufacturer pages and named retailer listings; blanks mean a value wasn't published, not that it's zero. Fill-time figures are derived estimates, not lab measurements. Always follow the manufacturer's fill and duty-cycle guidance.